info@guarnitex.com     +39 035.93.52.85

val_FLUOR

  • val_FLUOR
  • val_FLUOR

Val_FLUOR

Sheet made with unsintered P.T.F.E. DuPont


The Val-Fluor is a sheet composed of 100% by expanded unsintered PTFE DuPont.
It is made by a microstructure Multidirectional of PTFE fibers that guarantee an excellent resistance to the deformation with a low slide in cold water.
Suitable combining with breakable materials and with a modest clamping strength, it has not perfect areas.
It doesn’t contaminate the environment, doesn’t harden, is very flexible and compressible.

TECHNICAL FEATURES

  • It insure a perfect static tightness on flanges and metal reservoirs, glass, plastic and ceramic;
  • Soft and flexible It guarantees a perfect tightness on irregular or defective areas;
  • It is resistant to all chemical products and solvents, exception for alkaline materials in particular condtion (as DuPont literature);
  • It resists to elevated pressures and has a high thermal stability;
  • It is inodorous and tasteless in spite of being a plastic material it doesn’t have got melt point, then doesn’t melt, but it reaches a gelatinous state of very high stringiness at 327°C.

Thermal resistance: – 203°C e + 315°C;
Pressure resistance: 210 bar;
Chemical resistance: pH 0 – 14;
Density: 0,85 g/cm³;
Elasticity: 10/16%;
Max clamping value: 150N/mm²;

The operating temperature and pressure limits are not valid simultaneously. Furthermore, they depend on a variety of factors (condition of the joints, sizes torque, thermal or mechanical shocks) and consequently, they can only be given as a guideline. The datas presented in this sheet reflects typical characteristics of the product, be should not be considered as constituting a guarantee.

Composition:
100% PTFE DuPont not sintered;

According to the regulations:
F.D.A. (Food and drug administration)
W.R.C. (Public water supplies approved products)

 





val-FLUOR - Sheet

according to F.D.A. e W.R.C.





Launch Project